|
|
Build Your Online Product Catalogs?
| Product Name: |
4G mobile signal repeater mobile signal repeater S
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
Mobile signal repeater is used for increasing mobile signal , no |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
�Mini 4G signal booster/Cellphone signal repeater for 4G 2600mhz/ 4G LTE mobile phone signal booster/4G Repeater/Signal Booster
What is mobile signal repeater/4G mobile signal repeater ?
Mobile signal repeater is used for increasing mobile signal , no matter where signal weak or zero ,the repeater can help you to improve signal up to full bars !
4G mobile signal repeater is used for increasing 4G mobile signal .
4G mobile signal repeater mobile signal repeater ST-4G Specification :
1 Frequency Uplink:2500-2570MHZ
Downlink: 2620-2690MHZ
2 Max output 20±2dBm
3 Max gain and deviation Downlink: 65±2dB
uplink: 60±2dB
6 Automatic level control 25dB
7 Wave in band 6dB (P-P)
8 Max input level -10dBm
9 weight 0.55KG
10 size(Length*Width*Hight ) 15.5*11.2*3.85(CM)
11 connector N female
12 Power adapter INPUT:100-240VAC 50/60Hz OUTPUT:5V2A
13 WC*** System Modulation Accuracy �12.5%
Peak Code Domain Error �-35dB@Spreading Factor 256
ACRR � 30dBc/30KHz @ ±5MHz
� 50dBc/30KHz @ ±10MHz
The 4G Repeater with AGC Function and Auto Shut down Function :
What is AGC function ?
AGC means Automatic Gain Control; it means the booster can control the gain by itself according to the surroundings. When there is a sudden strong signal input, the booster can adjust the gain accordingly to protect the booster module and make sure the strong signal will not affect the base station signal.
When the signal outside is too weak, the booster can adjust the gain to maximum to boost the signal received at most for end user.
The AGC repeater come with LED indicators, it can show the running state of the booster, in case the booster and antenna installation is not right that cause loop oscillation, the LED light will indicate to user so user would be able to known and adjust the installation setup accordingly to avoid loop oscillation issue.
What is Auto Shut Down Function?
When the installation is not right that cause bad loop oscillation, the signal emit from the boost |
| Company: |
Shenzhen Sai Tong Tian Electronic Technology Co***ny
|
| Contact: |
Ms. kerry zhou |
| Address: |
Building 105 Liantang Industry Luohu District Shenzhen City China |
| Postcode: |
|
| Tel: |
33090205 |
| Fax: |
33090205 |
| E-mail: |
|
|
|
|
Home
